BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Buildinar - ECPv6.18.4//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-WR-CALNAME:Buildinar
X-ORIGINAL-URL:https://www.buildinar.com
X-WR-CALDESC:Events for Buildinar
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/Rome
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Copenhagen
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Paris
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Amsterdam
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Berlin
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
BEGIN:STANDARD
TZOFFSETFROM:+0530
TZOFFSETTO:+0530
TZNAME:IST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Mexico_City
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Madrid
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Asia/Kuala_Lumpur
BEGIN:STANDARD
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
TZNAME:+08
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Stockholm
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Dublin
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:IST
DTSTART:20250330T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:IST
DTSTART:20260329T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:IST
DTSTART:20270328T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Asia/Hong_Kong
BEGIN:STANDARD
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
TZNAME:HKT
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Toronto
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/Rome:20261201T093000
DTEND;TZID=Europe/Rome:20261201T103000
DTSTAMP:20261114T105904Z
CREATED:20261114T061646Z
LAST-MODIFIED:20261114T105904Z
UID:386-1796117400-1796121000@www.buildinar.com
SUMMARY:Calcolo strutturale in Autodesk® Revit® (Webinar in Italian)
DESCRIPTION:Passare dal modello Revit al calcolo strutturale senza ricostruire il modello è una richiesta frequente degli studi di ingegneria. Questo webinar mostra come SOFiSTiK genera e calcola il modello analitico direttamente da Revit\, riporta i risultati nel progetto e li usa per creare le armature\, con esempi di progetti realizzati. \nProgramma\n\nIntroduzione a SOFiSTiK e al suo ruolo nella progettazione strutturale\nConcetti di base dell’app Analytical Model Generator\nApplicazione di vincoli e carichi\, generazione e calcolo del modello\nImportazione dei risultati in Revit e creazione delle armature in base all’analisi\nPanoramica di progetti realizzati\n\nRelatori\n\nArmin Dariz\, Managing Partner\, BiMOTiON GmbH\n\nPer chi\nProgettisti\, disegnatori e ingegneri strutturisti che usano Autodesk Revit ogni giorno. \nIscriviti
URL:https://www.buildinar.com/session/calcolo-strutturale-in-autodesk-revit-webinar-in-italian/
LOCATION:Online
CATEGORIES:BIM,Structural analysis
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-calcolo-strutturale-in-autodesk-revit-webinar-in-italian-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Copenhagen:20261201T090000
DTEND;TZID=Europe/Copenhagen:20261201T094500
DTSTAMP:20261115T075508Z
CREATED:20261115T062107Z
LAST-MODIFIED:20261115T075508Z
UID:703-1796115600-1796118300@www.buildinar.com
SUMMARY:Autodesk Forma – nyheder\, tips og tricks
DESCRIPTION:Dette webinar gennemgår nyheder og nyttige funktioner i Autodesk Forma\, Autodesks platform til digitalt samarbejde i byggeprojekter. Sessionen viser\, hvordan AI\, bedre datastyring og kvalitetssikring direkte i platformen kan lette arbejdet for projektteams\, og hvilke tidligere efterspurgte funktioner nu er mulige. \nProgram\n\nAI Assistant og andre AI-funktioner til registreringer\, fotodokumentation og informationssøgning\, samt AI-agenter koblet til projektdata via MCP\nDatastyring med træk og slip af mapper\, forbedret brugeradministration og overblik over adgange og rettigheder\nKvalitetssikring med kontrolplaner og dokumentgennemgang direkte i platformen\nProjektoverblik med dashboards og rapportering som beslutningsgrundlag\nFunktioner\, man måske har overset: Forma Board\, tidsplanlægning i Forma Build samt tablet- og mobilfunktioner\n\nOplægsholdere\n\nSteffen Holm Sørensen\, konsulent\, NTI\n\nMålgruppe\nArkitekter\, ingeniører\, BIM-ansvarlige\, projektledere og andre\, der arbejder med digitalt samarbejde i byggeprojekter\, blandt andre brugere af Revit Cloud Worksharing eller Design Collaboration\, der vil have mere ud af Forma. \nTilmeld dig
URL:https://www.buildinar.com/session/autodesk-forma-nyheder-tips-og-tricks/
LOCATION:Online
CATEGORIES:AI,Collaboration & CDE
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-autodesk-forma-nyheder-tips-og-tricks-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261201T084500
DTEND;TZID=Europe/Paris:20261202T170000
DTSTAMP:20261115T075909Z
CREATED:20261115T074120Z
LAST-MODIFIED:20261115T075909Z
UID:770-1796114700-1796230800@www.buildinar.com
SUMMARY:EduBIM 2026 – Modéliser l'invisible : numérique et espaces souterrains
DESCRIPTION:Les Rencontres EduBIM 2026 consacrent leur journée recherche à la modélisation numérique du sous-sol et des ouvrages souterrains\, à la croisée du BIM\, des SIG et des jumeaux numériques. La seconde journée traite de l’intelligence artificielle au service de l’enseignement du BTP et de la performance des projets. Un rendez-vous qui relie recherche\, pratiques professionnelles et formation. \nAu programme\n\nKeynote sur la cartographie du sous-sol genevois comme outil de planification\, puis table ronde sur le changement climatique\, les aléas du sous-sol et la résilience des ouvrages souterrains\nSessions sur la conception avec le sous-sol\, le BIM et les nouvelles approches numériques\, dont l’usage des standards OSDU et Energistics RESQML\nJumeaux numériques appliqués à l’exploitation d’ouvrages\, à un barrage et à la sécurité des échafaudages\nEnseigner et former avec l’IA : pédagogie\, évaluation des compétences\, économie de la construction\nAteliers pratiques sur l’IA pour la gestion de chantier et l’évaluation des compétences\n\nIntervenants\n\nJoël Cuny\, directeur général\, ESTP\nMarcelle Laliberté\, directrice académique\, ESTP\nFrançois Robida\, MINND 2050\nS. Favre\, Office cantonal de l’environnement\, République et canton de Genève\nR. Chassagne\, BRGM\nQ. Chevrier\, CETU\nRani El Meouche\, ESTP\nLaure Olivié\, BeWork\n\nPour qui\nEnseignants\, chercheurs\, étudiants et professionnels du BTP qui s’intéressent au numérique appliqué au sous-sol et à l’usage de l’IA dans la formation. \nS’inscrire
URL:https://www.buildinar.com/session/edubim-2026-modeliser-linvisible-numerique-et-espaces-souterrains/
LOCATION:ESTP\, campus de Cachan
CATEGORIES:AI,BIM,Digital twin
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-edubim-2026-modeliser-l-invisible-numerique-et-espaces-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261127T110000
DTEND;TZID=Europe/Paris:20261127T120000
DTSTAMP:20261114T105903Z
CREATED:20261113T060652Z
LAST-MODIFIED:20261114T105903Z
UID:287-1795777200-1795780800@www.buildinar.com
SUMMARY:Webinaire - Rex sur le projet finaliste des openBIMAwards - Gare de Nice Aéroport (AREP)
DESCRIPTION:Ce retour d’expérience porte sur la démarche openBIM de la future gare de Nice Aéroport\, conçue par AREP pour SNCF Gares & Connexions et appelée à remplacer l’actuelle gare de Nice Saint-Augustin. Présentée comme la première gare « bioclimatique »\, elle a été pensée dès l’origine pour faire face aux risques climatiques de la Côte d’Azur. Le projet figure parmi les finalistes des openBIM Awards 2026 de buildingSMART International. \nAu programme\n\nLe projet de gare et ses choix de conception face aux risques climatiques.\nLa démarche openBIM comme langage commun des données entre disciplines et outils.\nUn exemple concret de la chaîne de valeur des usages numériques\, de la conception à la coordination entre acteurs.\nCe que ce projet finaliste des openBIM Awards 2026 enseigne pour d’autres opérations.\n\nPour qui\nMaîtres d’œuvre\, BIM managers et maîtres d’ouvrage qui veulent voir un cas réel d’openBIM sur un équipement de transport. \nS’inscrire
URL:https://www.buildinar.com/session/webinaire-rex-sur-le-projet-finaliste-des-openbimawards-gare-de-nice-aeroport-arep/
LOCATION:Online
CATEGORIES:BIM,Collaboration & CDE
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-webinaire-rex-sur-le-projet-finaliste-des-openbimawards-gare-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Amsterdam:20261127T100000
DTEND;TZID=Europe/Amsterdam:20261127T110000
DTSTAMP:20261114T105902Z
CREATED:20261113T060658Z
LAST-MODIFIED:20261114T105902Z
UID:295-1795773600-1795777200@www.buildinar.com
SUMMARY:Webinar 'Smart cities and digital twin technology: the case of Brussels'
DESCRIPTION:How can a digital model help a city plan its future? This session shows how Brussels is developing a digital twin\, a digital representation of the city\, to support urban planning. It explains how open data and data governance feed the initiative and walks through a practical use case focused on urban heat. \nProgramme\n\nObjectives of the Brussels digital twin project.\nDevelopment process and the role of open data and data governance.\nPractical example on urban heat.\nShort video showing the current stage of the twin\, and lessons learned so far.\nInteractive Q&A session.\n\nSpeakers\n\nCatalin Turlica\, Project Coordinator\, Twin4Resilience\nSophie Lamblotte\, Data and AI coordinator\, City of Brussels\n\nWho it’s for\nUrban planners\, city data teams\, digital twin practitioners and public sector professionals working with open data. \nRegister
URL:https://www.buildinar.com/session/webinar-smart-cities-and-digital-twin-technology-the-case-of-brussels/
LOCATION:Online
CATEGORIES:Digital twin
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-webinar-smart-cities-and-digital-twin-technology-the-case-of-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Berlin:20261126T170000
DTEND;TZID=Europe/Berlin:20261126T180000
DTSTAMP:20261115T075652Z
CREATED:20261115T073902Z
LAST-MODIFIED:20261115T075652Z
UID:757-1795712400-1795716000@www.buildinar.com
SUMMARY:BIM-Zertifizierung im Überblick: Das buildingSMART-Practitioner-Programm verstehen
DESCRIPTION:Das Webinar gibt einen kompakten Überblick über die BIM-Zertifizierung nach buildingSMART: welche Möglichkeiten es gibt\, welche Inhalte vermittelt werden und wie der Ablauf aussieht. Im Mittelpunkt stehen die beiden Ausbildungszweige Management und Koordination\, ihre Unterschiede und die Frage\, welcher Weg zu den eigenen beruflichen Zielen passt. So lassen sich die Optionen einordnen\, bevor man sich für eine Schulung entscheidet. \nProgramm\n\nÜberblick über das buildingSMART-Practitioner-Programm und seine Zertifizierungsmöglichkeiten\nDie Zweige Management und Koordination im Vergleich\nFür wen sich welcher Zweig eignet\nAblauf von Schulung und Prüfung\nAusführliche Fragerunde mit Hilfe bei der Wahl des passenden Wegs\n\nReferenten\n\nLeonie Magnolo\n\nZielgruppe\nFachleute\, die eine buildingSMART-Zertifizierung anstreben und den passenden Ausbildungsweg für ihre Laufbahn suchen. \nAnmelden
URL:https://www.buildinar.com/session/bim-zertifizierung-im-uberblick-das-buildingsmart-practitioner-programm-verstehen/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-bim-zertifizierung-im-ueberblick-das-buildingsmart-practition-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261126T140000
DTEND;TZID=Europe/Paris:20261126T150000
DTSTAMP:20261114T105901Z
CREATED:20261112T092826Z
LAST-MODIFIED:20261114T105901Z
UID:106-1795701600-1795705200@www.buildinar.com
SUMMARY:HVAC and electrical EPDs: demand is growing\, is your data ready?
DESCRIPTION:Specifiers\, contractors and building owners increasingly ask HVAC and electrical manufacturers for product-specific carbon data\, and regulation and procurement are expected to strengthen the trend. This second session of the series with VELTEK covers the commercial side of EPDs\, using data centers as the clearest early market: in a benchmark of 22 European projects\, HVAC and electrical equipment caused most of the embodied carbon. \nProgramme\n\nWhy more projects will request sustainability data for HVAC and electrical products\nWhat the data center market reveals about future demand\nHow missing EPDs penalize products in project LCAs that fall back on conservative generic data\nHow suppliers with credible data get specified\, and the commercial value involved\nHow VELTEK members can use their framework access to One Click LCA\n\nSpeakers\n\nSamuel Boswell\, Business Development Manager\, One Click LCA\nKai Borggreen\, Head of Department\, VELTEK\n\nWho it’s for\nSales\, product and leadership teams at HVAC and electrical manufacturers\, including VELTEK members\, plus sustainability and QHSE managers building an EPD programme. \nRegister
URL:https://www.buildinar.com/session/hvac-and-electrical-epds-demand-is-growing-is-your-data-ready/
LOCATION:Online
CATEGORIES:Carbon & LCA
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-hvac-and-electrical-epds-demand-is-growing-is-your-data-read-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261126T113000
DTEND;TZID=Asia/Kolkata:20261126T123000
DTSTAMP:20261114T105900Z
CREATED:20261111T160330Z
LAST-MODIFIED:20261114T105900Z
UID:20-1795692600-1795696200@www.buildinar.com
SUMMARY:Breaking Barriers: Connecting Design and Construction
DESCRIPTION:This session looks at how Bentley Infrastructure Cloud\, SYNCHRO 4D and iTwin can link design models\, the construction schedule and the job site\, so that design and construction teams work from connected information. \nRegister
URL:https://www.buildinar.com/session/breaking-barriers-connecting-design-and-construction/
LOCATION:Online
CATEGORIES:BIM,Digital twin,Project management
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-breaking-barriers-connecting-design-and-construction-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261126T113000
DTEND;TZID=Europe/Paris:20261126T120000
DTSTAMP:20261114T105858Z
CREATED:20261111T160330Z
LAST-MODIFIED:20261114T105858Z
UID:19-1795692600-1795694400@www.buildinar.com
SUMMARY:Réhabilitation en BIM : jusqu'où faut-il modéliser l'existant ?
DESCRIPTION:Jusqu’où faut-il modéliser un bâtiment existant lorsqu’on mène une réhabilitation en BIM ? Des représentants de VINCI Construction et de Dubuisson Architecture confrontent leurs points de vue d’entreprise et d’agence d’architecture sur le niveau de modélisation réellement utile au projet. \nAu programme\n\nLe cahier des charges BIM dans un projet de réhabilitation.\nLa numérisation de l’existant.\nLe DOE numérique.\n\nS’inscrire
URL:https://www.buildinar.com/session/rehabilitation-en-bim-jusquou-faut-il-modeliser-lexistant/
LOCATION:Online
CATEGORIES:BIM,Reality capture
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-rehabilitation-en-bim-jusquou-faut-il-modeliser-lexistant-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261126T110000
DTEND;TZID=Europe/Paris:20261126T120000
DTSTAMP:20261114T105857Z
CREATED:20261114T061143Z
LAST-MODIFIED:20261114T105857Z
UID:375-1795690800-1795694400@www.buildinar.com
SUMMARY:Nouveautés de SketchUp 2027
DESCRIPTION:Chaque nouvelle version de SketchUp modifie les habitudes de modélisation de ses utilisateurs. Ce webinaire présente les nouveautés de SketchUp 2027\, en particulier les outils de modélisation pensés pour suivre le rythme de la conception\, afin d’en mesurer l’intérêt avant de migrer. \nPour qui\nArchitectes\, architectes d’intérieur et concepteurs qui utilisent SketchUp au quotidien. \nS’inscrire
URL:https://www.buildinar.com/session/nouveautes-de-sketchup-2027/
LOCATION:Online
CATEGORIES:Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-nouveautes-de-sketchup-2027-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Mexico_City:20261125T160000
DTEND;TZID=America/Mexico_City:20261125T170000
DTSTAMP:20261114T105856Z
CREATED:20261114T061142Z
LAST-MODIFIED:20261114T105856Z
UID:374-1795622400-1795626000@www.buildinar.com
SUMMARY:AutoCAD o Revit: ¿Cómo decide una PyME?
DESCRIPTION:Para una pequeña o mediana empresa de construcción\, elegir entre seguir en AutoCAD o pasar a Revit implica costos\, formación y cambios en la forma de trabajar. Este webinar plantea esa decisión desde la realidad de las PyMEs\, para ayudar a valorar qué herramienta se ajusta mejor a sus proyectos. \nPara quién\nDirectivos y equipos técnicos de PyMEs de arquitectura\, ingeniería y construcción que evalúan su paso al BIM. \nInscribirse
URL:https://www.buildinar.com/session/autocad-o-revit-como-decide-una-pyme/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-autocad-o-revit-como-decide-una-pyme-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261125T120000
DTEND;TZID=America/Chicago:20261125T130000
DTSTAMP:20261114T105855Z
CREATED:20261114T061141Z
LAST-MODIFIED:20261114T105855Z
UID:373-1795608000-1795611600@www.buildinar.com
SUMMARY:Nexus Ally: Accelerate New Hire Onboarding
DESCRIPTION:New team members often repeat the same modelling mistakes until they learn a firm’s Revit standards\, and every correction cycle costs time. This session presents Nexus Ally\, a standards rules tool for Revit models\, and shows how it targets the most common errors of new hires and tracks compliance as they gain experience. \nProgramme\n\nTargeting the errors new hires make most often in Revit models\nTracking standards compliance according to experience\nReducing correction cycles during onboarding\n\nWho it’s for\nBIM managers\, team leads and firms that onboard new Revit users regularly. \nRegister
URL:https://www.buildinar.com/session/nexus-ally-accelerate-new-hire-onboarding/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-nexus-ally-accelerate-new-hire-onboarding-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Berlin:20261125T110000
DTEND;TZID=Europe/Berlin:20261125T131500
DTSTAMP:20261115T074759Z
CREATED:20261115T074124Z
LAST-MODIFIED:20261115T074759Z
UID:783-1795604400-1795612500@www.buildinar.com
SUMMARY:Cintoo Converge Munich\, Germany
DESCRIPTION:Cintoo Converge Munich gathers Industry 4.0 and AEC leaders to discuss digital twins\, reality capture and the management of 3D scan data on mission-critical sites\, facilities and factories. Customer case studies from an airport\, an industrial plant and an energy group are combined with a look at the Cintoo platform\, including the Cintoo 360 Edition based on the Ricoh THETA X camera. \nProgramme\n\nFrom reality capture to project control: progress tracking and BIM model validation at Vienna Airport\nFrom point cloud to a digital reality of an industrial plant\nHow Siemens Energy uses Cintoo to improve its service operations\nAccelerating digital twin workflows with Cintoo\, followed by an open Q&A\nNetworking lunch with speakers and attendees\n\nSpeakers\n\nDI Kazim Onur Arisan\, Head of Scan & Modeling\, VIE Build GmbH (Vienna Airport)\nPhilipp Hibbing\, Project Manager & Mechanical Engineer\, Nikotec\nDirk Lomberg-Can\, Mechanical Engineer\, Innovation & Digitalization\, Siemens Energy Global GmbH & Co. KG\n\nWho it’s for\nIndustry 4.0 and AEC professionals\, Cintoo customers and partners who work with scan data\, reality capture and digital twins. \nRegister
URL:https://www.buildinar.com/session/cintoo-converge-munich-germany/
LOCATION:ICM Internationales Congress Center München
CATEGORIES:BIM,Digital twin,Reality capture
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-cintoo-converge-munich-germany-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Madrid:20261125T110000
DTEND;TZID=Europe/Madrid:20261125T120000
DTSTAMP:20261115T080313Z
CREATED:20261115T074123Z
LAST-MODIFIED:20261115T080313Z
UID:773-1795604400-1795608000@www.buildinar.com
SUMMARY:Eurocódigos de segunda generación: ¿qué cambia en el diseño de estructuras de acero?
DESCRIPTION:Este webinar repasa las novedades de la segunda generación de Eurocódigos y explica cómo afectan al diseño de estructuras de acero. Muestra además cómo aplicar los nuevos requisitos en proyectos reales con Advance Design\, software de análisis estructural por elementos finitos que integra los Eurocódigos y las normas norteamericanas. \nPrograma\n\nPrincipales diferencias entre la primera y la segunda generación de Eurocódigos\nImpacto de estos cambios en el proyecto de estructuras de acero\nNovedades en las acciones de viento y nieve y en las combinaciones de cargas\nEfecto de los nuevos requisitos en las comprobaciones de acero\, con ejemplos prácticos en Advance Design\n\nPonentes\n\nAlejandro Sarró\, Solution Sales Specialist\, GRAITEC Spain\n\nPara quién\nIngenieros y proyectistas de estructuras de acero que preparan la transición a los Eurocódigos de segunda generación. \nInscribirse
URL:https://www.buildinar.com/session/eurocodigos-de-segunda-generacion-que-cambia-en-el-diseno-de-estructuras-de-acero/
LOCATION:Online
CATEGORIES:Regulation & standards,Structural analysis
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-eurocodigos-de-segunda-generacion-que-cambia-en-el-diseno-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20261125T093000
DTEND;TZID=Europe/London:20261126T163000
DTSTAMP:20261115T074423Z
CREATED:20261115T074121Z
LAST-MODIFIED:20261115T074423Z
UID:771-1795599000-1795710600@www.buildinar.com
SUMMARY:London Build 2026
DESCRIPTION:The AI & Digital Construction Arena at London Build 2026 is a dedicated stage for digital construction technology\, innovation and digital transformation case studies. Over two days\, panels bring together architects\, contractors\, engineers\, clients and technology specialists to discuss how AI\, data and digital twins are changing the way buildings are briefed\, delivered and operated. \nProgramme\n\nHow AI is redefining the architectural brief and transforming architecture practice in the UK\nIntelligent buildings\, and the impact of digital transformation\, AI and data on UK real estate\nDigital twins in action across UK construction\, and connecting information across the construction lifecycle\nInformation management for greener decisions and BIM for delivering net zero energy buildings\nDigital collaboration for UK housing delivery and opportunities for women in construction tech\n\nSpeakers\n\nLilian Ho\, Associate Director\, Digital & BIM\, AECOM\nNatasha Forde\, Head of Digital Solutions\, Operations\, Grosvenor\nNicolas Deloeil\, Chief Data and AI Officer\, Bouygues UK\nCallum Stayton\, Head of AI Advisory UK&I\, Jacobs\nAnthony Tuffour\, Director\, Global Lead GIS and Digital Twins\, Buro Happold\nJames Franklin\, Digital Twin Project Director\, Kier Group\nHamza Shaikh\, Associate and Creative AI Lead\, Gensler\nJoseph Price\, Head of Growth & Adoption\, Autodesk Forma\, Autodesk\n\nWho it’s for\nArchitects\, engineers\, contractors\, clients and digital construction professionals following the use of AI\, BIM and digital twins in the built environment. \nCredits\nThe show programme includes more than 200 hours of CPD presentations across the two days. \nRegister
URL:https://www.buildinar.com/session/london-build-2026/
LOCATION:ExCeL London
CATEGORIES:AI,BIM,Digital twin
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-london-build-2026-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kuala_Lumpur:20261124T150000
DTEND;TZID=Asia/Kuala_Lumpur:20261124T153000
DTSTAMP:20261114T105854Z
CREATED:20261114T061139Z
LAST-MODIFIED:20261114T105854Z
UID:370-1795532400-1795534200@www.buildinar.com
SUMMARY:Revit MEP Family: Creating a Ceiling Air Diffuser in Revit
DESCRIPTION:Building a parametric MEP family is a core skill for anyone modelling HVAC systems in Revit. This 30-minute live demonstration walks through the creation of a ceiling air diffuser family\, from geometry to the airflow connector\, with tips for making families that can be reused across projects. \nProgramme\n\nModelling the diffuser geometry\nSetting up parameters so that dimensions can be adjusted\nAdding and configuring an airflow connector\nLoading the family into a project and placing it in a ceiling\n\nWho it’s for\nBuilding services students\, beginners in MEP family creation and HVAC designers\, engineers and BIM staff using Revit. \nRegister
URL:https://www.buildinar.com/session/revit-mep-family-creating-a-ceiling-air-diffuser-in-revit/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-revit-mep-family-creating-a-ceiling-air-diffuser-in-revit-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20261124T140000
DTEND;TZID=Europe/London:20261124T150000
DTSTAMP:20261115T083826Z
CREATED:20261115T074119Z
LAST-MODIFIED:20261115T083826Z
UID:769-1795528800-1795532400@www.buildinar.com
SUMMARY:IAM Webinar – From Data Latency to Digital Twin: Converging GIS\, BIM and AI for Smarter Drainage Asset Management
DESCRIPTION:This webinar explains how MACE Qatar built an operational digital twin to manage Qatar’s drainage infrastructure\, a network of more than 3\,000 km of pipelines plus treatment facilities. It shows how bringing together GIS\, BIM\, real-time telemetry and AI reduced the delay between field and office data and moved maintenance from reactive work towards predictive\, risk-based decisions. \nProgramme\n\nThe path from having no GIS in 2020 to AI-driven asset intelligence in 2025\nThe GeoMACE ecosystem and BIM-GIS interoperability in a framework aligned with ISO 55001 and ISO 19650\nDrone LiDAR reality capture and AI-based rain simulation for flood mitigation\nGovernance of asset information through a “Golden Thread” approach\nLessons on digital adoption at scale\, from a drainage operation and maintenance portal used by more than 900 active users\n\nSpeakers\n\nAli Farouk Ahmed\, Asset Manager\, MACE Qatar\n\nWho it’s for\nAsset management and information management professionals who want to use location intelligence and digital twins on an infrastructure portfolio\, whether drainage or another network. \nRegister
URL:https://www.buildinar.com/session/iam-webinar-from-data-latency-to-digital-twin-converging-gis-bim-and-ai-for-smarter-drainage-asset-management/
LOCATION:Online
CATEGORIES:AI,Digital twin,Infrastructure
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-iam-webinar-from-data-latency-to-digital-twin-converging-gis-bn-2.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261124T140000
DTEND;TZID=Europe/Paris:20261124T150000
DTSTAMP:20261114T105853Z
CREATED:20261114T061138Z
LAST-MODIFIED:20261114T105853Z
UID:368-1795528800-1795532400@www.buildinar.com
SUMMARY:Les nouveautés de la dernière version et de la prochaine version
DESCRIPTION:Solibri sert à contrôler la qualité des maquettes BIM avant leur diffusion. Cette démonstration passe en revue les nouveautés de la dernière version et donne un premier aperçu de la prochaine\, notamment l’ouverture directe des fichiers Revit\, avant un temps d’échange en direct. \nAu programme\n\nNouvelles fonctions de recherche et de classification\nMesures sur les nuages de points\nContrôles automatisés avec Superrun\nAvant-première de l’ouverture des fichiers Revit dans Solibri\nQuestions-réponses en direct\n\nIntervenants\n\nNicolas Valette\, Customer Success Manager\, Solibri\n\nPour qui\nBIM managers\, coordinateurs et contrôleurs qui vérifient des maquettes IFC ou Revit. \nS’inscrire
URL:https://www.buildinar.com/session/les-nouveautes-de-la-derniere-version-et-de-la-prochaine-version/
LOCATION:Online
CATEGORIES:BIM,Collaboration & CDE
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-les-nouveautes-de-la-derniere-version-et-de-la-prochaine-ver-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Stockholm:20261124T130000
DTEND;TZID=Europe/Stockholm:20261124T150000
DTSTAMP:20261114T105852Z
CREATED:20261114T061140Z
LAST-MODIFIED:20261114T105852Z
UID:371-1795525200-1795532400@www.buildinar.com
SUMMARY:Resultat från SBE-projektet Digital samverkan för den byggda miljön
DESCRIPTION:Projektet Interoperabilitet – Digital samverkan för den byggda miljön\, finansierat av innovationsprogrammet Smart Built Environment\, presenterar sina resultat. Fokus ligger på hur information kan länkas\, valideras och återanvändas mellan system och organisationer\, och på vad strukturerad information betyder för mer tillförlitlig AI. \nProgram\n\nEtt gemensamt ramverk för digital samverkan\, med principer och rekommendationer\nKonkreta lösningar och demonstrationer av länkning\, validering och återanvändning av information\nNya möjligheter med AI genom kunskapsgrafer och strukturerad information\nNästa steg: hur resultaten kan föras vidare och förvaltas långsiktigt\nÖppen diskussion och frågor\n\nProjektgrupp\n\nPeter Axelsson\, projektledare\, EcoValue Svenska AB/BIM Alliance\nPeter Johansson\, docent\, Tekniska Högskolan i Jönköping\nLars Harrie\, professor\, Lunds universitet\nAnna Neidenström\, Digital Delivery Manager\, Ramboll Sverige\nSara Beltrami\, seniorkonsult BIM och digitalisering\, Sweco Sverige\nTorbjörn Holm\, seniorkonsult\, Torbjörn B. Holm Konsult\nAmra Halilovic\, BIM-strateg\, Trafikverket\nLars Wikström\, seniorkonsult\, Triona\n\nMålgrupp\nYrkesverksamma inom BIM\, GIS\, informationshantering\, digitalisering och AI i samhällsbyggnadssektorn. \nAnmäl dig
URL:https://www.buildinar.com/session/resultat-fran-sbe-projektet-digital-samverkan-for-den-byggda-miljon/
LOCATION:Online
CATEGORIES:AI,BIM,Collaboration & CDE
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-resultat-fran-sbe-projektet-digital-samverkan-for-den-byggda-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20261124T130000
DTEND;TZID=Europe/London:20261124T134500
DTSTAMP:20261114T105851Z
CREATED:20261111T160328Z
LAST-MODIFIED:20261114T105851Z
UID:17-1795525200-1795527900@www.buildinar.com
SUMMARY:Is Your Project Data Helping You Make Better Business Decisions?
DESCRIPTION:Project programmes hold a great deal of information on performance\, risk\, forecasts and commercial exposure\, yet that data often stays locked inside individual plans. This webinar shows how Asta Vision brings several programmes together in a single view\, so that leadership teams can see the wider picture\, spot emerging risks and reach better-informed decisions more quickly. \nProgramme\n\nUsing built-in dashboards to identify delivery risks early\, before they turn into costly problems\nProtecting project margin by seeing changes\, overrunning activities and their possible commercial impact more clearly\nTurning detailed programme data into insight at project and portfolio level\nComparing current projects with past performance to reveal trends that can guide future planning\nDirecting resources where they will have most effect\, with a clearer view across multiple programmes\n\nWho it’s for\nLeadership teams and managers who rely on programme data to steer project delivery and portfolio decisions. \nRegister
URL:https://www.buildinar.com/session/is-your-project-data-helping-you-make-better-business-decisions/
LOCATION:Online
CATEGORIES:Project management
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-is-your-project-data-helping-you-make-better-business-decisi-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261124T120000
DTEND;TZID=America/Chicago:20261124T130000
DTSTAMP:20261114T105850Z
CREATED:20261114T061139Z
LAST-MODIFIED:20261114T105850Z
UID:369-1795521600-1795525200@www.buildinar.com
SUMMARY:Template Management for Better Standards
DESCRIPTION:Civil 3D templates drift quickly when several teams maintain their own versions\, and drawing inconsistencies follow. This one-hour session shows how CIM Manager Suite helps organise Civil 3D templates\, simplify their maintenance across teams and keep drawing standards consistent from one project to the next. \nProgramme\n\nOrganising Civil 3D templates in one managed structure\nSimplifying template maintenance across teams\nReducing drawing inconsistencies between projects\n\nWho it’s for\nCAD and BIM managers and Civil 3D teams responsible for company standards. \nRegister
URL:https://www.buildinar.com/session/template-management-for-better-standards/
LOCATION:Online
CATEGORIES:Design,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-template-management-for-better-standards-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Dublin:20261124T120000
DTEND;TZID=Europe/Dublin:20261124T130000
DTSTAMP:20261114T105848Z
CREATED:20261111T160329Z
LAST-MODIFIED:20261114T105848Z
UID:18-1795521600-1795525200@www.buildinar.com
SUMMARY:Connected Construction
DESCRIPTION:Connected Construction is the fourth session of Digital Construction Technologies\, a six-part webinar series on how data is reshaping the way the construction industry works. This session is dedicated to connected construction\, within a series that also explores how digital tools change collaboration between project teams. The series is aligned with UN Sustainable Development Goals 9\, 11 and 12. \nProgramme\n\nUse of data across the construction industry\, from building information modelling (BIM) to digital twins\, simulation and visualisation\nBIM for following materials and products arriving on site\, with attention to traceability and sustainability\nSensors that feed digital twins\, including sensors built into structural elements\nAugmented reality for site inspections\, continuous progress monitoring and easier quality checks\nSeries sessions: Building Digital\, BIM and Beyond\, Building Digital Standards\, Connected Construction\, AI in Construction\, Smart Buildings & Infrastructure\n\nWho it’s for\nEngineers and other construction industry professionals interested in digital technologies. \nRegister
URL:https://www.buildinar.com/session/connected-construction/
LOCATION:Online
CATEGORIES:Connected site
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-connected-construction-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Madrid:20261124T110000
DTEND;TZID=Europe/Madrid:20261124T120000
DTSTAMP:20261115T084402Z
CREATED:20261115T074122Z
LAST-MODIFIED:20261115T084402Z
UID:772-1795518000-1795521600@www.buildinar.com
SUMMARY:Seguridad estructural optimizada: evaluación de la vulnerabilidad sísmica
DESCRIPTION:Este webinar aborda la evaluación de la vulnerabilidad sísmica de estructuras y la toma de decisiones de diseño más seguras con TRICALC\, programa de cálculo estructural por elementos finitos para hormigón\, acero y madera. Resulta útil para comprobar cómo responde una estructura ante un sismo y ajustar su dimensionamiento con criterios de seguridad. \nPrograma\n\nEvaluación de la vulnerabilidad sísmica de distintas tipologías estructurales con las herramientas de análisis y comprobación de TRICALC\nGeneración y aplicación de combinaciones de carga sísmica conforme a la normativa vigente\nComprobación del comportamiento de la estructura bajo dichas combinaciones\nOptimización del diseño sísmico para mejorar la seguridad y reducir el riesgo de colapso\n\nPonentes\n\nAlejandro Sarró\, Solution Sales Specialist\, GRAITEC Spain\nDavid Sánchez Romo\, Technical Solution Specialist\, GRAITEC\n\nPara quién\nIngenieros y proyectistas de estructuras que necesitan evaluar o mejorar el comportamiento sísmico de sus proyectos. \nInscribirse
URL:https://www.buildinar.com/session/seguridad-estructural-optimizada-evaluacion-de-la-vulnerabilidad-sismica/
LOCATION:Online
CATEGORIES:Structural analysis
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-seguridad-estructural-optimizada-evaluacion-de-la-vulnerabilidad-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Berlin:20261124T100000
DTEND;TZID=Europe/Berlin:20261124T110000
DTSTAMP:20261114T105847Z
CREATED:20261114T061141Z
LAST-MODIFIED:20261114T105847Z
UID:372-1795514400-1795518000@www.buildinar.com
SUMMARY:Ein erster Einblick – Teil 1: Chaos in der Planungsphase? Beteiligte in frühen Leistungsphasen sinnvoll einbinden und Planungsdaten im Griff behalten (Dalux Box)
DESCRIPTION:In frühen Leistungsphasen arbeiten viele Beteiligte mit wechselnden Plänen\, Modellen und Kommunikationskanälen. Der erste Teil dieser Einsteigerreihe zeigt am Beispiel der Dalux Box\, wie ein Projektteam Pläne und Modelle zentral ablegt\, Versionen sauber führt und Freigaben nachvollziehbar gestaltet\, ohne dabei in die Detailkonfiguration einzusteigen. \nProgramm\n\nTypische Probleme in der frühen Planungsphase: viele Beteiligte\, Versionen und Kanäle\nBeteiligte einbinden: Rollen\, Zugriffsrechte und Kommunikationswege\nOrdnung bei Plänen und Modellen: Versionierung\, Freigaben und Prüfprozesse\nFragen und Antworten sowie Ausblick auf Teil 2 zur Baustellenphase\n\nReferenten\n\nAnna Beitnitz\, Customer Success Manager\, Dalux\nClara Gmeiner\, Customer Success Manager\, Dalux\nLisa Schleicher\, Sales Executive\, Dalux\n\nZielgruppe\nProjektleitungen\, Planende und Bauherrenvertretungen\, die in digitale Planungsprozesse im Infrastrukturbau einsteigen. \nAnmelden
URL:https://www.buildinar.com/session/ein-erster-einblick-teil-1-chaos-in-der-planungsphase-beteiligte-in-fruhen-leistungsphasen-sinnvoll-einbinden-und-planungsdaten-im-griff-behalten-dalux-box/
LOCATION:Online
CATEGORIES:Collaboration & CDE,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-ein-erster-einblick-teil-1-chaos-in-der-planungsphase-beteil-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Berlin:20261124T090000
DTEND;TZID=Europe/Berlin:20261125T180000
DTSTAMP:20261114T105846Z
CREATED:20261112T092825Z
LAST-MODIFIED:20261114T105846Z
UID:105-1795510800-1795629600@www.buildinar.com
SUMMARY:BIM World MUNICH 2026
DESCRIPTION:BIM World MUNICH is an international platform for the digitalisation of the construction\, real estate and facility management industries\, combining a congress with a trade fair. Now in its tenth edition\, it brings together more than 250 exhibitors and over 250 speakers\, so visitors can compare solutions\, meet suppliers and follow current BIM practice in one place. \nProgramme\n\nCongress\, breakout sessions and an Innovation Stage spread over several stages\nTrade fair with integrated open forums\nBIM Town\, an innovation area where start-ups present their work in pitch sessions\nThematic tracks such as Bim4Circular\, Bim4FM\, Bim4NETZERO\, Bim4Infrastructure\, Bim4Machines and Bim4Real Estate\nPresentation of the Smart Building / Smart Construction Innovation World Cup Awards\n\nWho it’s for\nMembers of the international BIM community working in construction\, real estate and facility management\, including those focused on circularity\, net zero\, infrastructure and building operation. \nRegister
URL:https://www.buildinar.com/session/bim-world-munich-2026/
LOCATION:ICM Internationales Congress Center München
CATEGORIES:BIM,Digital twin
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-bim-world-munich-2026-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261123T100000
DTEND;TZID=Europe/Paris:20261123T110000
DTSTAMP:20261114T105845Z
CREATED:20261111T160327Z
LAST-MODIFIED:20261114T105845Z
UID:16-1795428000-1795431600@www.buildinar.com
SUMMARY:Carbon Designer 3D: carbon baselines without a BIM model
DESCRIPTION:Much of a building’s embodied carbon is locked in during the concept phase\, yet many LCA tools only work once a detailed BIM model exists. This live session shows how Carbon Designer 3D produces compliant carbon baselines\, material quantities and design comparisons from simple geometry\, so major decisions can be made early. \nProgramme\n\nEmbodied carbon baselines from building type\, size and location\, without a BIM model\nSide-by-side comparison of structural systems such as timber and concrete\nHotspot analysis while massing and materials are still open\nRefurbishment versus new build scenarios to support retain-or-rebuild decisions\nAutomated quantities\, regional datasets and continuity with detailed LCA workflows\n\nSpeakers\n\nMyriam El Kozah\, Product Owner\, One Click LCA\nSteven Zijlstra\, Product Marketing Manager\, One Click LCA\n\nWho it’s for\nSustainability specialists\, architects\, cost planners\, pre-construction leads\, developers and asset owners who need carbon feedback before committing to a design. \nRegister
URL:https://www.buildinar.com/session/carbon-insights-from-day-one-see-carbon-designer-3d-live/
LOCATION:Online
CATEGORIES:Carbon & LCA,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-carbon-insights-from-day-one-see-carbon-designer-3d-live-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20261123
DTEND;VALUE=DATE:20261126
DTSTAMP:20261115T075150Z
CREATED:20261115T062106Z
LAST-MODIFIED:20261115T075150Z
UID:702-1795392000-1795651199@www.buildinar.com
SUMMARY:Construction Innovation Expo 2026 (CIExpo 2026)
DESCRIPTION:Construction Innovation Expo 2026 is a triennial flagship event for the construction sector in Hong Kong\, combining an exhibition\, international conferences and technical tours on construction technology. More than 180 exhibitors present smart construction equipment\, robotics and automation\, digital project management platforms\, safety innovations and green building solutions. \nProgramme\n\nInternational conference on artificial intelligence and smart construction\nConference on construction productivity and robotics\nConferences on construction safety and on sustainable construction\nConference on vocational and professional education and training for the construction industry\nMain stage\, a business matching zone for meeting partners and suppliers\, and technical tours open to overseas visitors\n\nWho it’s for\nConstruction professionals\, buyers\, suppliers and investors from Hong Kong\, the Chinese Mainland and abroad who are looking for new technologies and partners. \nRegister
URL:https://www.buildinar.com/session/construction-innovation-expo-2026-ciexpo-2026/
LOCATION:Hong Kong Convention and Exhibition Centre
CATEGORIES:AI,Connected site
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-construction-innovation-expo-2026-ciexpo-2026-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20261121T150000
DTEND;TZID=America/Toronto:20261121T160000
DTSTAMP:20261114T105844Z
CREATED:20261114T061137Z
LAST-MODIFIED:20261114T105844Z
UID:367-1795273200-1795276800@www.buildinar.com
SUMMARY:Revit Intermedio
DESCRIPTION:Este webinar comunitario propone un nivel intermedio de Revit para quienes ya conocen las bases del programa y quieren avanzar en su uso diario. Lo impulsa una red de arquitectos e ingenieros latinoamericanos radicados en Canadá\, con un enfoque práctico y en español. \nPara quién\nArquitectos\, ingenieros y técnicos hispanohablantes que ya usan Revit y quieren consolidar un nivel intermedio. \nInscribirse
URL:https://www.buildinar.com/session/revit-intermedio/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-revit-intermedio-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Rome:20261120T153000
DTEND;TZID=Europe/Rome:20261120T160000
DTSTAMP:20261115T072112Z
CREATED:20261115T065416Z
LAST-MODIFIED:20261115T072112Z
UID:663-1795188600-1795190400@www.buildinar.com
SUMMARY:Processi edilizi digitali: dall’e-Permit all’e-Procurement
DESCRIPTION:Il webinar ripercorre la digitalizzazione dei processi edilizi\, dal titolo abilitativo gestito in forma digitale (e-Permit) fino all’appalto condotto con strumenti digitali (e-Procurement). Si inserisce nel filone della Convention ACCA dedicato a openBIM e digitalizzazione degli appalti pubblici\, con attenzione agli aggiornamenti normativi. È utile per orientarsi tra le fasi in cui il dato digitale accompagna l’opera\, dall’autorizzazione all’affidamento dei lavori. \nA chi si rivolge\nProgettisti\, imprese e stazioni appaltanti coinvolti nella digitalizzazione delle pratiche edilizie e degli appalti. \nIscriviti
URL:https://www.buildinar.com/session/processi-edilizi-digitali-dalle-permit-alle-procurement/
LOCATION:Online
CATEGORIES:Project management,Regulation & standards
ATTACH;FMTTYPE=image/webp:https://www.buildinar.com/wp-content/uploads/2026/11/cover-processi-edilizi-digitali-dalle-permit-alle-procurement-bn.webp
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kuala_Lumpur:20261120T150000
DTEND;TZID=Asia/Kuala_Lumpur:20261120T153000
DTSTAMP:20261114T105843Z
CREATED:20261114T061136Z
LAST-MODIFIED:20261114T105843Z
UID:366-1795186800-1795188600@www.buildinar.com
SUMMARY:AcadsysRevit UBBL Pre-Checker – UBBL Compliance – Check Before You Submit
DESCRIPTION:Checking a design against the Malaysian Uniform Building By-Laws (UBBL) is often done late\, on drawings\, when changes are expensive. This short live session shows how the AcadsysRevit UBBL Pre-Checker add-in runs UBBL checks directly in Autodesk Revit\, so that issues can be fixed before a submission. \nProgramme\n\nRunning UBBL checks on the active view or on selected plans\nReading the dashboard\, which scores results by pillar and filters failed checks such as stairs that are too narrow\nJumping from a finding to the highlighted element in the model\nLooking up UBBL guidance without leaving Revit\n\nWho it’s for\nArchitects and BIM modellers preparing submissions\, BIM coordinators\, fire and life safety reviewers and project leads working under UBBL. \nRegister
URL:https://www.buildinar.com/session/acadsysrevit-ubbl-pre-checker-ubbl-compliance-check-before-you-submit/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-acadsysrevit-ubbl-pre-checker-ubbl-compliance-check-before-y-bn.png
END:VEVENT
END:VCALENDAR