BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//Buildinar - ECPv6.18.4//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.buildinar.com
X-WR-CALDESC:Events for Buildinar
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:Europe/London
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:BST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Los_Angeles
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20250309T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20251102T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20260308T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20261101T090000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0800
TZOFFSETTO:-0700
TZNAME:PDT
DTSTART:20270314T100000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0700
TZOFFSETTO:-0800
TZNAME:PST
DTSTART:20271107T090000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Paris
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Dublin
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:IST
DTSTART:20250330T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20251026T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:IST
DTSTART:20260329T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20261025T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0000
TZOFFSETTO:+0100
TZNAME:IST
DTSTART:20270328T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0000
TZNAME:GMT
DTSTART:20271031T010000
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Chicago
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20250309T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20251102T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20260308T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20261101T070000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0600
TZOFFSETTO:-0500
TZNAME:CDT
DTSTART:20270314T080000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0500
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20271107T070000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Berlin
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/New_York
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Asia/Kolkata
BEGIN:STANDARD
TZOFFSETFROM:+0530
TZOFFSETTO:+0530
TZNAME:IST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Brussels
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Bucharest
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0200
TZOFFSETTO:+0300
TZNAME:EEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0300
TZOFFSETTO:+0200
TZNAME:EET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Asia/Kuala_Lumpur
BEGIN:STANDARD
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
TZNAME:+08
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Toronto
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20250309T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20251102T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20260308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20261101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20270314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20271107T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:Europe/Stockholm
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20250330T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20251026T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20260329T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20261025T010000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
TZNAME:CEST
DTSTART:20270328T010000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:+0200
TZOFFSETTO:+0100
TZNAME:CET
DTSTART:20271031T010000
END:STANDARD
END:VTIMEZONE
BEGIN:VTIMEZONE
TZID:America/Mexico_City
BEGIN:STANDARD
TZOFFSETFROM:-0600
TZOFFSETTO:-0600
TZNAME:CST
DTSTART:20250101T000000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20261116T120000
DTEND;TZID=Europe/London:20261116T130000
DTSTAMP:20261114T105815Z
CREATED:20261113T060657Z
LAST-MODIFIED:20261114T105815Z
UID:293-1794830400-1794834000@www.buildinar.com
SUMMARY:Managing Digital Information in Construction
DESCRIPTION:From BIM to digital twins\, construction data is changing how facility owners and public bodies manage buildings\, meet legal requirements and deliver better outcomes. This seminar looks at how to navigate that landscape\, identify the information that matters\, connect it effectively and turn it into business results across the building lifecycle. \nProgramme\n\nHow BIM is evolving from a design and construction process into an information ecosystem for the whole lifecycle.\nThe Building Safety Act\, accountability and the golden thread of information.\nIoT\, connected building systems and digital twins to understand building performance in real time.\nBenefits beyond compliance: safety in occupation\, sustainability\, asset performance and risk management.\n\nSpeakers\n\nMatt Samways\, Managing Director\, AIMIS\n\nWho it’s for\nConstruction managers\, facility owners\, estate managers and public sector teams responsible for building information. \nCredits\nThe session can be logged as part of the annual CIOB CPD return. \nRegister
URL:https://www.buildinar.com/session/managing-digital-information-in-construction/
LOCATION:Online
CATEGORIES:BIM,Digital twin
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-managing-digital-information-in-construction-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20261117T090000
DTEND;TZID=America/Los_Angeles:20261117T100000
DTSTAMP:20261114T105817Z
CREATED:20261112T092823Z
LAST-MODIFIED:20261114T105817Z
UID:101-1794906000-1794909600@www.buildinar.com
SUMMARY:GC Innovation Insights Hour: Closing the Gap Between Field and Office
DESCRIPTION:This session follows a general contractor that relies on DroneDeploy and Procore to bring jobsite conditions to the office team. The speakers explain how aerial maps and 360-degree captures help track earthwork\, walk projects remotely and record conditions before concrete is placed\, then show where that data lands in Procore for office staff to use. \nProgramme\n\nFollowing cut and fill and elevation changes with elevation maps and contour analysis\, without a trip to site\nRemote site walks based on 360-degree captures shared with the office\nDocumenting site conditions ahead of each pour\nHow DroneDeploy maps and 360 walks appear in Procore Photos and Documents\nLive Q&A with the speakers\n\nSpeakers\n\nAdrian Castillo\, VDC Manager\, The Beck Group\nBryce Richards\, Solutions Engineer\, DroneDeploy\nChelsea Suarez\, Senior Product Marketing Manager\, Procore\n\nWho it’s for\nGeneral contractors and jobsite teams who want field information to reach project managers and office staff faster. \nRegister
URL:https://www.buildinar.com/session/gc-innovation-insights-hour-closing-the-gap-between-field-and-office/
LOCATION:Online
CATEGORIES:Connected site,Reality capture
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-gc-innovation-insights-hour-closing-the-gap-between-field-an-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261117T103000
DTEND;TZID=Europe/Paris:20261117T113000
DTSTAMP:20261114T105818Z
CREATED:20261111T160320Z
LAST-MODIFIED:20261114T105818Z
UID:9-1794911400-1794915000@www.buildinar.com
SUMMARY:Cybersécurité : un enjeu stratégique pour les entreprises de la Construction
DESCRIPTION:Les cyberattaques ne visent plus seulement les grands groupes : les TPE et PME de la construction comptent désormais parmi les cibles les plus exposées. Cette session aide à comprendre les risques auxquels ces entreprises font face et à repérer les actions à mener en priorité pour protéger leurs données et leur activité. Elle est animée avec un expert en cybersécurité de la DGSI. \nAu programme\n\nLes principales menaces cyber qui visent les entreprises.\nLes failles les plus courantes dans les TPE et PME.\nLes bonnes pratiques pour sécuriser les données et les outils numériques.\nLa conduite à tenir lorsqu’un incident survient.\n\nPour qui\nDirigeants et équipes des TPE et PME du secteur de la construction. \nS’inscrire
URL:https://www.buildinar.com/session/cybersecurite-un-enjeu-strategique-pour-les-entreprises-de-la-construction/
LOCATION:Online
CATEGORIES:Cybersecurity
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-cybersecurite-un-enjeu-strategique-pour-les-entreprises-de-l-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Dublin:20261117T120000
DTEND;TZID=Europe/Dublin:20261117T130000
DTSTAMP:20261114T105820Z
CREATED:20261111T160322Z
LAST-MODIFIED:20261114T105820Z
UID:11-1794916800-1794920400@www.buildinar.com
SUMMARY:Building Digital Standards
DESCRIPTION:Building Digital Standards is the third session of Digital Construction Technologies\, a six-part webinar series on how data is reshaping the way the construction industry works. This session is dedicated to standards for digital construction\, within a series that also explores how digital tools change collaboration between project teams. The series is aligned with UN Sustainable Development Goals 9\, 11 and 12. \nProgramme\n\nUse of data across the construction industry\, from building information modelling (BIM) to digital twins\, simulation and visualisation\nBIM for following materials and products arriving on site\, with attention to traceability and sustainability\nSensors that feed digital twins\, including sensors built into structural elements\nAugmented reality for site inspections\, continuous progress monitoring and easier quality checks\nSeries sessions: Building Digital\, BIM and Beyond\, Building Digital Standards\, Connected Construction\, AI in Construction\, Smart Buildings & Infrastructure\n\nWho it’s for\nEngineers and other construction industry professionals interested in digital technologies. \nRegister
URL:https://www.buildinar.com/session/building-digital-standards/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-building-digital-standards-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261117T120000
DTEND;TZID=America/Chicago:20261117T130000
DTSTAMP:20261114T105822Z
CREATED:20261114T060628Z
LAST-MODIFIED:20261114T105822Z
UID:344-1794916800-1794920400@www.buildinar.com
SUMMARY:Parts Tagger – Bulk Changes Across a Pipe Network
DESCRIPTION:Updating structure and pipe properties one object at a time across a large Civil 3D network is slow and a frequent source of inconsistencies. This one-hour session presents Parts Tagger\, a tool of the CIM Project Suite for Civil 3D\, which applies values to every structure and pipe of a network in a single pass\, so that labels and tables stay aligned with the model. \nProgramme\n\nApplying grate\, cover and material values to manholes and structures in bulk\nAssigning alignment and surface references across a whole pipe network\nKeeping labels and tables updated after a bulk change\n\nWho it’s for\nCivil 3D users and infrastructure design teams who manage storm or sanitary pipe networks. \nRegister
URL:https://www.buildinar.com/session/parts-tagger-bulk-changes-across-a-pipe-network/
LOCATION:Online
CATEGORIES:Design,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-parts-tagger-bulk-changes-across-a-pipe-network-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20261118T090000
DTEND;TZID=America/Los_Angeles:20261118T100000
DTSTAMP:20261114T105823Z
CREATED:20261111T160326Z
LAST-MODIFIED:20261114T105823Z
UID:15-1794992400-1794996000@www.buildinar.com
SUMMARY:SC Innovation Insights Hour
DESCRIPTION:The SC Innovation Insights Hour brings specialty contractors together to compare notes on what works in their day-to-day practice. It offers a peer view of innovation from the trade contractor side of construction\, based on the experience of firms facing similar challenges. \nWho it’s for\nSpecialty contractors who want to learn how their peers approach innovation in daily operations. \nRegister
URL:https://www.buildinar.com/session/sc-innovation-insights-hour/
LOCATION:Online
CATEGORIES:Project management
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-sc-innovation-insights-hour-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Los_Angeles:20261118T100000
DTEND;TZID=America/Los_Angeles:20261118T103000
DTSTAMP:20261114T105825Z
CREATED:20261111T160324Z
LAST-MODIFIED:20261114T105825Z
UID:13-1794996000-1794997800@www.buildinar.com
SUMMARY:Glean for Construction: Keep projects moving from land to job site
DESCRIPTION:In construction\, the context behind each decision is often spread across many tools and systems\, which slows projects down. This session looks at how Fischer Homes\, a large private US homebuilder\, uses Glean AI to connect project knowledge\, improve land acquisition and job-site readiness\, and streamline its construction workflows. The speakers cover the challenges the company faced\, the workflows it rebuilt and how it turned AI adoption into better business processes. \nProgramme\n\nWhat changes for teams when project knowledge sits in a single trusted\, searchable place.\nHow context lets AI go beyond answering questions to guide decisions in the field and in the office.\nHow Fischer Homes rebuilt workflows for land acquisition\, site preparation and construction.\nBest practices for turning AI adoption into repeatable business process improvement.\n\nSpeakers\n\nAmeya Ganpule\, Product Marketing Manager\, Industry\nAmara Gangaramani\, AI Outcomes Manager\, Glean\nRob Cochran\, Principal Technologist\, Fischer Homes\nSebastian LaRosa\, AI Principal Technologist\, Fischer Homes\n\nRegister
URL:https://www.buildinar.com/session/glean-pour-la-construction-faire-avancer-les-projets-du-terrain-au-chantier/
LOCATION:Online
CATEGORIES:AI
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-glean-pour-la-construction-faire-avancer-les-projets-du-terr-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Berlin:20261118T100000
DTEND;TZID=Europe/Berlin:20261118T123000
DTSTAMP:20261114T105824Z
CREATED:20261111T160323Z
LAST-MODIFIED:20261114T105824Z
UID:12-1794996000-1795005000@www.buildinar.com
SUMMARY:IGNITE On The Road von Schnitzer&: Frühschicht
DESCRIPTION:IGNITE On The Road bringt die Neuerungen von Archicad 30 direkt zu den Anwendern. In dieser Sonderschicht stellt der Graphisoft-Partner Schnitzer& die neue Version vor und beantwortet Fragen aus der Praxis. Neben den Funktionen geht es auch um Cloudlizenzen und das Subscription-Modell\, sodass offene Punkte vor dem Umstieg direkt geklärt werden können. Die Frühschicht ist eine von mehreren Ausgaben dieser Sonderschicht\, die Schnitzer& zusätzlich als Spätschicht und als Termin in Regensburg anbietet. Termine unter dem Namen IGNITE On The Road führt Graphisoft mit seinen Partnern in mehreren Ländern durch. \nProgramm\n\nVorstellung der Neuerungen in Archicad 30\nFragen und Antworten rund um die neue Version\nInformationen zu Cloudlizenzen\nFragen zum Subscription-Modell\n\nZielgruppe\nArchicad-Anwender und Planungsbüros\, die sich vor dem Wechsel auf Archicad 30 über neue Funktionen\, Cloudlizenzen und Subscription informieren möchten. \nAnmelden
URL:https://www.buildinar.com/session/ignite-on-the-road-archicad-30/
LOCATION:Online
CATEGORIES:Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-ignite-on-the-road-archicad-30-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261118T110000
DTEND;TZID=America/New_York:20261118T120000
DTSTAMP:20261114T105826Z
CREATED:20261112T092823Z
LAST-MODIFIED:20261114T105826Z
UID:102-1794999600-1795003200@www.buildinar.com
SUMMARY:Improving Project Outcomes with AI Built for Construction
DESCRIPTION:Oracle Construction and Engineering presents an approach to AI built on the project applications and records construction teams already use\, rather than generic AI tools. The session shows how connected data and governed workflows help teams find information faster\, spot risks earlier and plan next steps\, while keeping human judgment and accountability at the centre. \nProgramme\n\nTelling construction-relevant AI apart from generic capabilities and hype\nWhy trusted project records\, construction context and governance make AI useful\nHow connected project and enterprise data improves visibility and early risk detection\nWhere agentic AI can move from insight to action while keeping permissions\, audit trails and human control\n\nWho it’s for\nContractors\, owners and project leaders looking at AI for project delivery and enterprise decisions. \nRegister
URL:https://www.buildinar.com/session/improving-project-outcomes-with-ai-built-for-construction/
LOCATION:Online
CATEGORIES:AI,Project management
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-improving-project-outcomes-with-ai-built-for-construction-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261118T110000
DTEND;TZID=Europe/Paris:20261118T120000
DTSTAMP:20261114T105827Z
CREATED:20261114T060631Z
LAST-MODIFIED:20261114T105827Z
UID:348-1794999600-1795003200@www.buildinar.com
SUMMARY:Webinaire : découvrez SmartRouting\, le complément Revit dédié à la tuyauterie industrielle
DESCRIPTION:La tuyauterie industrielle reste un terrain où Revit montre vite ses limites face aux outils spécialisés. Ce webinaire présente SmartRouting\, un complément Revit développé par Adalense pour modéliser des réseaux de tuyauterie industrielle\, de la définition des classes de tuyauterie jusqu’à l’export vers les outils de fabrication. \nAu programme\n\nRoutage 3D des réseaux de tuyauterie dans Revit\nClasses de tuyauterie et exploitation des données P&ID\nModélisation à partir de nuages de points\nExport PCF vers les outils d’isométriques et de préfabrication\n\nIntervenants\n\nMichael Cozzolino\nÉric Dieudonné\n\nPour qui\nProjeteurs\, ingénieurs process et BIM managers qui modélisent des installations industrielles dans Revit. \nS’inscrire
URL:https://www.buildinar.com/session/webinaire-decouvrez-smartrouting-le-complement-revit-dedie-a-la-tuyauterie-industrielle/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-webinaire-decouvrez-smartrouting-le-complement-revit-dedie-a-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261118T130000
DTEND;TZID=America/New_York:20261118T140000
DTSTAMP:20261114T105829Z
CREATED:20261114T060632Z
LAST-MODIFIED:20261114T105829Z
UID:349-1795006800-1795010400@www.buildinar.com
SUMMARY:Webinar: Create Single-Line Diagrams in Revit Without Late Nights or Change Orders
DESCRIPTION:Single-line diagrams are often drawn separately from the Revit model\, which leads to duplicated data and drawings that drift out of sync when the architect changes the plans. This webinar shows how ElectroBIM creates single-line diagrams and the related calculations directly in Revit\, so that every sheet draws on the same electrical information. \nProgramme\n\nAvoiding duplication errors by keeping all sheets on the same data\nResponding to architectural revisions in minutes rather than days\nKeeping single-line diagrams consistent across people and projects\n\nSpeakers\n\nDavid Robison\, President\, Design Master Software\n\nWho it’s for\nElectrical engineering firms that produce single-line diagrams and electrical calculations in Revit. \nRegister
URL:https://www.buildinar.com/session/webinar-create-single-line-diagrams-in-revit-without-late-nights-or-change-orders/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-webinar-create-single-line-diagrams-in-revit-without-late-ni-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kolkata:20261118T150000
DTEND;TZID=Asia/Kolkata:20261118T161500
DTSTAMP:20261114T105831Z
CREATED:20261114T060630Z
LAST-MODIFIED:20261114T105831Z
UID:346-1795014000-1795018500@www.buildinar.com
SUMMARY:BIM to Building Performance: Creating a More Connected Workflow
DESCRIPTION:Moving from a BIM model to a building energy model often means rebuilding geometry and losing time on rework. This webinar shows how a connected BIM-to-BEM workflow based on IESVE can produce a single analysis-ready model for energy\, carbon\, HVAC and compliance studies\, with examples from firms that have streamlined the process. \nProgramme\n\nCommon obstacles between BIM and building performance analysis\, and how to limit rework\nModel exchange between IESVE and the main BIM platforms\nOne model for energy\, carbon\, HVAC and compliance work\, including ECBC and green building certifications\nRecent interoperability features\, including IES Sync for Revit\nCase studies of streamlined BIM-to-BEM workflows\n\nSpeakers\n\nSaptesh Savant\, Business Development Manager\nMax Hanning\, Building Performance Consultant\, Team Lead\nDilip Jajoo\, Project Team Leader\n\nWho it’s for\nBIM and design professionals who want to reduce model rework and extend their work into building performance analysis. \nRegister
URL:https://www.buildinar.com/session/bim-to-building-performance-creating-a-more-connected-workflow/
LOCATION:Online
CATEGORIES:BIM,Carbon & LCA
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-bim-to-building-performance-creating-a-more-connected-workfl-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Brussels:20261118T160000
DTEND;TZID=Europe/Brussels:20261126T180000
DTSTAMP:20261114T105832Z
CREATED:20261111T160325Z
LAST-MODIFIED:20261114T105832Z
UID:14-1795017600-1795716000@www.buildinar.com
SUMMARY:Life-Cycle Driven Design of Steel Structures for Reduced Embodied Carbon
DESCRIPTION:This webinar series explains how life-cycle thinking can steer the design of steel and composite structures towards lower embodied carbon. Each session pairs core teaching with an industry case study\, and a bonus session addresses seismic resilience and reparability. Participants receive the slides\, calculation templates\, worked examples\, a life-cycle design checklist and a comparative table of embodied carbon regulations and reporting frameworks across countries. \nProgramme\n\nLife-cycle thinking for steel and composite structures: climate targets\, stages A1 to A5 and the role of composite floors\nCarbon accounting\, EPDs and data variability\, end-of-life stages C1 to C4\, design for deconstruction and steel reuse\nDesign strategies for buildings\, industrial structures and bridges\, with sensitivity studies on span\, number of storeys\, slab type and lateral system\nHybrid solutions such as steel-timber systems\, balancing cost and performance\nBonus session on seismic resilience and reparability\, based on the Italian RS4 research project\, fragility curves and self-centering devices\n\nSpeakers\n\nAlper Kanyilmaz\, Associate Professor\, Politecnico di Milano\nRicardo Pimentel\, Divisional Director\, Pell Frischmann\nRoy Fishwick\, Managing Director\, Cleveland Steel & Tubes\nJosé Oliveira Pedro\, IST Lisbon and GRID Consulting Engineers\nAhmet Topbaş\, Founder\, ATTEC\n\nRegister
URL:https://www.buildinar.com/session/life-cycle-driven-design-of-steel-structures-for-reduced-embodied-carbon/
LOCATION:Online
CATEGORIES:Carbon & LCA,Structural analysis
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-life-cycle-driven-design-of-steel-structures-for-reduced-emb-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Bucharest:20261118T170000
DTEND;TZID=Europe/Bucharest:20261118T180000
DTSTAMP:20261114T105833Z
CREATED:20261114T060630Z
LAST-MODIFIED:20261114T105833Z
UID:347-1795021200-1795024800@www.buildinar.com
SUMMARY:Înscriere Webinar: Splendid Development devine Autodesk Training Center
DESCRIPTION:Splendid Development a devenit Autodesk Training Center\, iar acest webinar explică ce înseamnă acest statut pentru inginerii și proiectanții care lucrează cu produsele Autodesk. Sesiunea combină informații despre certificarea oficială cu demonstrații practice în Civil 3D și Revit\, utile pentru cei care vor să își valideze competențele. \nProgram\n\nCum se obține certificarea oficială pentru produsele Autodesk\nDemonstrații live în Civil 3D și Revit\, inclusiv armare 3D și extrase\nSesiune de întrebări și răspunsuri cu formatorii\n\nPentru cine\nStudenți\, ingineri și reprezentanți ai firmelor de proiectare care folosesc Civil 3D sau Revit. \nÎnscriere
URL:https://www.buildinar.com/session/inscriere-webinar-splendid-development-devine-autodesk-training-center/
LOCATION:Online
CATEGORIES:BIM,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-inscriere-webinar-splendid-development-devine-autodesk-train-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261119T110000
DTEND;TZID=Europe/Paris:20261119T120000
DTSTAMP:20261114T105834Z
CREATED:20261113T060652Z
LAST-MODIFIED:20261114T105834Z
UID:286-1795086000-1795089600@www.buildinar.com
SUMMARY:Webinaire bSFrance - Retour du sommet technique international openBIM : IFCX et IFC 4.4
DESCRIPTION:buildingSMART France consacre une heure au dernier sommet technique international openBIM et à l’état d’avancement du standard IFC. L’objectif est de comprendre ce qui change dans la prochaine version de la norme et la direction prise pour la génération suivante\, avant que ces évolutions n’arrivent dans les logiciels\, les cahiers des charges et les échanges entre acteurs d’un projet. \nAu programme\n\nRetours du dernier sommet technique international openBIM.\nIFC 4.4 : la prochaine version du standard\, actuellement en cours de normalisation ISO.\nIFCX : la vision et les orientations de la future génération de l’IFC.\nCe que ces technologies peuvent changer dans la manière de concevoir et de construire.\n\nPour qui\nBIM managers\, maîtres d’ouvrage\, éditeurs et praticiens qui suivent l’évolution des formats ouverts et de l’interopérabilité. \nS’inscrire
URL:https://www.buildinar.com/session/webinaire-bsfrance-retour-du-sommet-technique-international-openbim-ifcx-et-ifc-4-4/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-webinaire-bsfrance-retour-du-sommet-technique-international-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261119T113000
DTEND;TZID=Europe/Paris:20261119T123000
DTSTAMP:20261114T105836Z
CREATED:20261114T060633Z
LAST-MODIFIED:20261114T105836Z
UID:351-1795087800-1795091400@www.buildinar.com
SUMMARY:Webinar BIM n°4 : Pré-synthèse et Gestion des conflits
DESCRIPTION:Quatrième volet d’un cycle consacré aux fondamentaux du BIM\, après le géoréférencement\, l’environnement de données commun et la structuration des données\, cette session porte sur la présynthèse. L’objectif : détecter tôt les conflits entre maquettes\, distinguer ceux qui bloquent vraiment et arriver en réunion de synthèse avec des sujets déjà triés\, à partir d’exemples tirés de projets réels. \nAu programme\n\nOrganiser une démarche de présynthèse efficace\nRepérer\, analyser et prioriser les conflits entre maquettes\nOutils de détection : Navisworks\, Solibri\nMettre en place une résolution collaborative et préparer des réunions de synthèse productives\n\nIntervenants\n\nSarra Razgallah\, BIM manager\, NTI\nFabian Bertrandon\, BIM manager\, NTI\n\nPour qui\nBIM managers\, coordinateurs et équipes de synthèse sur des projets de construction. \nS’inscrire
URL:https://www.buildinar.com/session/webinar-bim-n4-pre-synthese-et-gestion-des-conflits/
LOCATION:Online
CATEGORIES:BIM,Collaboration & CDE
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-webinar-bim-n4-pre-synthese-et-gestion-des-conflits-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261119T120000
DTEND;TZID=America/Chicago:20261119T130000
DTSTAMP:20261114T105837Z
CREATED:20261114T060634Z
LAST-MODIFIED:20261114T105837Z
UID:353-1795089600-1795093200@www.buildinar.com
SUMMARY:A Comprehensive Introduction to Family Loader
DESCRIPTION:Reloading updated Revit families into projects is a routine task that becomes tedious when it has to be repeated across many files. This session introduces Family Loader\, a tool of the BIM Batch Suite\, which reloads families into a single project or in batch across several projects. \nProgramme\n\nAccessing Family Loader within BIM Batch Suite\nReloading families into an open project\nRunning batch reloads across multiple projects\n\nWho it’s for\nBIM managers and Revit users who maintain family libraries and project standards. \nRegister
URL:https://www.buildinar.com/session/a-comprehensive-introduction-to-family-loader/
LOCATION:Online
CATEGORIES:BIM
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-a-comprehensive-introduction-to-family-loader-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261119T140000
DTEND;TZID=America/New_York:20261119T150000
DTSTAMP:20261114T105838Z
CREATED:20261111T160335Z
LAST-MODIFIED:20261114T105838Z
UID:25-1795096800-1795100400@www.buildinar.com
SUMMARY:Infrastructure Immortality: Surviving the Decade by Maintaining Data Integrity
DESCRIPTION:Infrastructure assets outlive the software and teams that design them. This CMAA session presents a practical workflow strategy for building a continuous digital thread across the project lifecycle\, so that project records become lasting\, usable data rather than files lost at handover. \nProgramme\n\nWhy data integrity breaks down between design\, construction and operation\nWhat a continuous digital thread looks like in practice\nHow digital tools turn project records into data that stays usable for years\n\nWho it’s for\nConstruction and program managers\, owners and asset managers responsible for infrastructure data beyond project delivery. \nCredits\n1 CMCI Renewal Point and 1 Professional Development Hour. \nRegister
URL:https://www.buildinar.com/session/infrastructure-immortality/
LOCATION:Online
CATEGORIES:Digital twin,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-infrastructure-immortality-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/New_York:20261119T140000
DTEND;TZID=America/New_York:20261119T150000
DTSTAMP:20261114T105840Z
CREATED:20261114T060632Z
LAST-MODIFIED:20261114T105840Z
UID:350-1795096800-1795100400@www.buildinar.com
SUMMARY:What's new in MSUITE BIM 10.0
DESCRIPTION:MSUITE BIM is a Revit add-in used by MEP contractors to prepare models for prefabrication. This session walks through version 10.0\, which adds support for Revit 2027 and reworks several tools used to turn a coordinated model into fabrication-ready spools and supports. \nProgramme\n\nCompatibility with Revit 2027\nSpool locking to protect fabrication packages\nThe redesigned Hanger Manager\nBeta preview of automated pipe support placement\n\nWho it’s for\nMEP contractors\, detailers and prefabrication teams who work in Revit. \nRegister
URL:https://www.buildinar.com/session/whats-new-in-msuite-bim-10-0/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-whats-new-in-msuite-bim-10-0-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261119T140000
DTEND;TZID=Europe/Paris:20261119T150000
DTSTAMP:20261114T105842Z
CREATED:20261114T060634Z
LAST-MODIFIED:20261114T105842Z
UID:352-1795096800-1795100400@www.buildinar.com
SUMMARY:Reogen V6 le ferraillage change de dimension
DESCRIPTION:Reogen est un plugin de ferraillage pour Revit. Cette présentation détaille sa version 6\, qui suit les dernières versions de Revit et ajoute plusieurs fonctions de ferraillage 3D et de gestion des treillis soudés\, utiles pour accélérer la production des plans d’armatures. \nAu programme\n\nCompatibilité Revit 2027 et .NET 10 pour Revit 2025 et 2026\nImport des fichiers DXF issus de Robot Structural Analysis\nFerraillage 3D : script Reogen en bêta\, copie conforme\, dessin et copie des treillis soudés\nSauvegarde des formules de répartition\, regroupement et numérotation des treillis soudés\nColorisation des treillis soudés selon leur type et leurs dimensions\n\nIntervenants\n\nJonathan Renou\n\nPour qui\nProjeteurs béton armé et bureaux d’études structure qui produisent leurs plans d’armatures dans Revit. \nS’inscrire
URL:https://www.buildinar.com/session/reogen-v6-le-ferraillage-change-de-dimension/
LOCATION:Online
CATEGORIES:BIM,Structural analysis
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-reogen-v6-le-ferraillage-change-de-dimension-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Asia/Kuala_Lumpur:20261120T150000
DTEND;TZID=Asia/Kuala_Lumpur:20261120T153000
DTSTAMP:20261114T105843Z
CREATED:20261114T061136Z
LAST-MODIFIED:20261114T105843Z
UID:366-1795186800-1795188600@www.buildinar.com
SUMMARY:AcadsysRevit UBBL Pre-Checker – UBBL Compliance – Check Before You Submit
DESCRIPTION:Checking a design against the Malaysian Uniform Building By-Laws (UBBL) is often done late\, on drawings\, when changes are expensive. This short live session shows how the AcadsysRevit UBBL Pre-Checker add-in runs UBBL checks directly in Autodesk Revit\, so that issues can be fixed before a submission. \nProgramme\n\nRunning UBBL checks on the active view or on selected plans\nReading the dashboard\, which scores results by pillar and filters failed checks such as stairs that are too narrow\nJumping from a finding to the highlighted element in the model\nLooking up UBBL guidance without leaving Revit\n\nWho it’s for\nArchitects and BIM modellers preparing submissions\, BIM coordinators\, fire and life safety reviewers and project leads working under UBBL. \nRegister
URL:https://www.buildinar.com/session/acadsysrevit-ubbl-pre-checker-ubbl-compliance-check-before-you-submit/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-acadsysrevit-ubbl-pre-checker-ubbl-compliance-check-before-y-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Toronto:20261121T150000
DTEND;TZID=America/Toronto:20261121T160000
DTSTAMP:20261114T105844Z
CREATED:20261114T061137Z
LAST-MODIFIED:20261114T105844Z
UID:367-1795273200-1795276800@www.buildinar.com
SUMMARY:Revit Intermedio
DESCRIPTION:Este webinar comunitario propone un nivel intermedio de Revit para quienes ya conocen las bases del programa y quieren avanzar en su uso diario. Lo impulsa una red de arquitectos e ingenieros latinoamericanos radicados en Canadá\, con un enfoque práctico y en español. \nPara quién\nArquitectos\, ingenieros y técnicos hispanohablantes que ya usan Revit y quieren consolidar un nivel intermedio. \nInscribirse
URL:https://www.buildinar.com/session/revit-intermedio/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-revit-intermedio-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Paris:20261123T100000
DTEND;TZID=Europe/Paris:20261123T110000
DTSTAMP:20261114T105845Z
CREATED:20261111T160327Z
LAST-MODIFIED:20261114T105845Z
UID:16-1795428000-1795431600@www.buildinar.com
SUMMARY:Carbon Designer 3D: carbon baselines without a BIM model
DESCRIPTION:Much of a building’s embodied carbon is locked in during the concept phase\, yet many LCA tools only work once a detailed BIM model exists. This live session shows how Carbon Designer 3D produces compliant carbon baselines\, material quantities and design comparisons from simple geometry\, so major decisions can be made early. \nProgramme\n\nEmbodied carbon baselines from building type\, size and location\, without a BIM model\nSide-by-side comparison of structural systems such as timber and concrete\nHotspot analysis while massing and materials are still open\nRefurbishment versus new build scenarios to support retain-or-rebuild decisions\nAutomated quantities\, regional datasets and continuity with detailed LCA workflows\n\nSpeakers\n\nMyriam El Kozah\, Product Owner\, One Click LCA\nSteven Zijlstra\, Product Marketing Manager\, One Click LCA\n\nWho it’s for\nSustainability specialists\, architects\, cost planners\, pre-construction leads\, developers and asset owners who need carbon feedback before committing to a design. \nRegister
URL:https://www.buildinar.com/session/carbon-insights-from-day-one-see-carbon-designer-3d-live/
LOCATION:Online
CATEGORIES:Carbon & LCA,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-carbon-insights-from-day-one-see-carbon-designer-3d-live-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Berlin:20261124T100000
DTEND;TZID=Europe/Berlin:20261124T110000
DTSTAMP:20261114T105847Z
CREATED:20261114T061141Z
LAST-MODIFIED:20261114T105847Z
UID:372-1795514400-1795518000@www.buildinar.com
SUMMARY:Ein erster Einblick – Teil 1: Chaos in der Planungsphase? Beteiligte in frühen Leistungsphasen sinnvoll einbinden und Planungsdaten im Griff behalten (Dalux Box)
DESCRIPTION:In frühen Leistungsphasen arbeiten viele Beteiligte mit wechselnden Plänen\, Modellen und Kommunikationskanälen. Der erste Teil dieser Einsteigerreihe zeigt am Beispiel der Dalux Box\, wie ein Projektteam Pläne und Modelle zentral ablegt\, Versionen sauber führt und Freigaben nachvollziehbar gestaltet\, ohne dabei in die Detailkonfiguration einzusteigen. \nProgramm\n\nTypische Probleme in der frühen Planungsphase: viele Beteiligte\, Versionen und Kanäle\nBeteiligte einbinden: Rollen\, Zugriffsrechte und Kommunikationswege\nOrdnung bei Plänen und Modellen: Versionierung\, Freigaben und Prüfprozesse\nFragen und Antworten sowie Ausblick auf Teil 2 zur Baustellenphase\n\nReferenten\n\nAnna Beitnitz\, Customer Success Manager\, Dalux\nClara Gmeiner\, Customer Success Manager\, Dalux\nLisa Schleicher\, Sales Executive\, Dalux\n\nZielgruppe\nProjektleitungen\, Planende und Bauherrenvertretungen\, die in digitale Planungsprozesse im Infrastrukturbau einsteigen. \nAnmelden
URL:https://www.buildinar.com/session/ein-erster-einblick-teil-1-chaos-in-der-planungsphase-beteiligte-in-fruhen-leistungsphasen-sinnvoll-einbinden-und-planungsdaten-im-griff-behalten-dalux-box/
LOCATION:Online
CATEGORIES:Collaboration & CDE,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-ein-erster-einblick-teil-1-chaos-in-der-planungsphase-beteil-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Dublin:20261124T120000
DTEND;TZID=Europe/Dublin:20261124T130000
DTSTAMP:20261114T105848Z
CREATED:20261111T160329Z
LAST-MODIFIED:20261114T105848Z
UID:18-1795521600-1795525200@www.buildinar.com
SUMMARY:Connected Construction
DESCRIPTION:Connected Construction is the fourth session of Digital Construction Technologies\, a six-part webinar series on how data is reshaping the way the construction industry works. This session is dedicated to connected construction\, within a series that also explores how digital tools change collaboration between project teams. The series is aligned with UN Sustainable Development Goals 9\, 11 and 12. \nProgramme\n\nUse of data across the construction industry\, from building information modelling (BIM) to digital twins\, simulation and visualisation\nBIM for following materials and products arriving on site\, with attention to traceability and sustainability\nSensors that feed digital twins\, including sensors built into structural elements\nAugmented reality for site inspections\, continuous progress monitoring and easier quality checks\nSeries sessions: Building Digital\, BIM and Beyond\, Building Digital Standards\, Connected Construction\, AI in Construction\, Smart Buildings & Infrastructure\n\nWho it’s for\nEngineers and other construction industry professionals interested in digital technologies. \nRegister
URL:https://www.buildinar.com/session/connected-construction/
LOCATION:Online
CATEGORIES:Connected site
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-connected-construction-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261124T120000
DTEND;TZID=America/Chicago:20261124T130000
DTSTAMP:20261114T105850Z
CREATED:20261114T061139Z
LAST-MODIFIED:20261114T105850Z
UID:369-1795521600-1795525200@www.buildinar.com
SUMMARY:Template Management for Better Standards
DESCRIPTION:Civil 3D templates drift quickly when several teams maintain their own versions\, and drawing inconsistencies follow. This one-hour session shows how CIM Manager Suite helps organise Civil 3D templates\, simplify their maintenance across teams and keep drawing standards consistent from one project to the next. \nProgramme\n\nOrganising Civil 3D templates in one managed structure\nSimplifying template maintenance across teams\nReducing drawing inconsistencies between projects\n\nWho it’s for\nCAD and BIM managers and Civil 3D teams responsible for company standards. \nRegister
URL:https://www.buildinar.com/session/template-management-for-better-standards/
LOCATION:Online
CATEGORIES:Design,Infrastructure
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-template-management-for-better-standards-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/London:20261124T130000
DTEND;TZID=Europe/London:20261124T134500
DTSTAMP:20261114T105851Z
CREATED:20261111T160328Z
LAST-MODIFIED:20261114T105851Z
UID:17-1795525200-1795527900@www.buildinar.com
SUMMARY:Is Your Project Data Helping You Make Better Business Decisions?
DESCRIPTION:Project programmes hold a great deal of information on performance\, risk\, forecasts and commercial exposure\, yet that data often stays locked inside individual plans. This webinar shows how Asta Vision brings several programmes together in a single view\, so that leadership teams can see the wider picture\, spot emerging risks and reach better-informed decisions more quickly. \nProgramme\n\nUsing built-in dashboards to identify delivery risks early\, before they turn into costly problems\nProtecting project margin by seeing changes\, overrunning activities and their possible commercial impact more clearly\nTurning detailed programme data into insight at project and portfolio level\nComparing current projects with past performance to reveal trends that can guide future planning\nDirecting resources where they will have most effect\, with a clearer view across multiple programmes\n\nWho it’s for\nLeadership teams and managers who rely on programme data to steer project delivery and portfolio decisions. \nRegister
URL:https://www.buildinar.com/session/is-your-project-data-helping-you-make-better-business-decisions/
LOCATION:Online
CATEGORIES:Project management
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-is-your-project-data-helping-you-make-better-business-decisi-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=Europe/Stockholm:20261124T130000
DTEND;TZID=Europe/Stockholm:20261124T150000
DTSTAMP:20261114T105852Z
CREATED:20261114T061140Z
LAST-MODIFIED:20261114T105852Z
UID:371-1795525200-1795532400@www.buildinar.com
SUMMARY:Resultat från SBE-projektet Digital samverkan för den byggda miljön
DESCRIPTION:Projektet Interoperabilitet – Digital samverkan för den byggda miljön\, finansierat av innovationsprogrammet Smart Built Environment\, presenterar sina resultat. Fokus ligger på hur information kan länkas\, valideras och återanvändas mellan system och organisationer\, och på vad strukturerad information betyder för mer tillförlitlig AI. \nProgram\n\nEtt gemensamt ramverk för digital samverkan\, med principer och rekommendationer\nKonkreta lösningar och demonstrationer av länkning\, validering och återanvändning av information\nNya möjligheter med AI genom kunskapsgrafer och strukturerad information\nNästa steg: hur resultaten kan föras vidare och förvaltas långsiktigt\nÖppen diskussion och frågor\n\nProjektgrupp\n\nPeter Axelsson\, projektledare\, EcoValue Svenska AB/BIM Alliance\nPeter Johansson\, docent\, Tekniska Högskolan i Jönköping\nLars Harrie\, professor\, Lunds universitet\nAnna Neidenström\, Digital Delivery Manager\, Ramboll Sverige\nSara Beltrami\, seniorkonsult BIM och digitalisering\, Sweco Sverige\nTorbjörn Holm\, seniorkonsult\, Torbjörn B. Holm Konsult\nAmra Halilovic\, BIM-strateg\, Trafikverket\nLars Wikström\, seniorkonsult\, Triona\n\nMålgrupp\nYrkesverksamma inom BIM\, GIS\, informationshantering\, digitalisering och AI i samhällsbyggnadssektorn. \nAnmäl dig
URL:https://www.buildinar.com/session/resultat-fran-sbe-projektet-digital-samverkan-for-den-byggda-miljon/
LOCATION:Online
CATEGORIES:AI,BIM,Collaboration & CDE
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-resultat-fran-sbe-projektet-digital-samverkan-for-den-byggda-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Chicago:20261125T120000
DTEND;TZID=America/Chicago:20261125T130000
DTSTAMP:20261114T105855Z
CREATED:20261114T061141Z
LAST-MODIFIED:20261114T105855Z
UID:373-1795608000-1795611600@www.buildinar.com
SUMMARY:Nexus Ally: Accelerate New Hire Onboarding
DESCRIPTION:New team members often repeat the same modelling mistakes until they learn a firm’s Revit standards\, and every correction cycle costs time. This session presents Nexus Ally\, a standards rules tool for Revit models\, and shows how it targets the most common errors of new hires and tracks compliance as they gain experience. \nProgramme\n\nTargeting the errors new hires make most often in Revit models\nTracking standards compliance according to experience\nReducing correction cycles during onboarding\n\nWho it’s for\nBIM managers\, team leads and firms that onboard new Revit users regularly. \nRegister
URL:https://www.buildinar.com/session/nexus-ally-accelerate-new-hire-onboarding/
LOCATION:Online
CATEGORIES:BIM,Regulation & standards
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-nexus-ally-accelerate-new-hire-onboarding-bn.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Mexico_City:20261125T160000
DTEND;TZID=America/Mexico_City:20261125T170000
DTSTAMP:20261114T105856Z
CREATED:20261114T061142Z
LAST-MODIFIED:20261114T105856Z
UID:374-1795622400-1795626000@www.buildinar.com
SUMMARY:AutoCAD o Revit: ¿Cómo decide una PyME?
DESCRIPTION:Para una pequeña o mediana empresa de construcción\, elegir entre seguir en AutoCAD o pasar a Revit implica costos\, formación y cambios en la forma de trabajar. Este webinar plantea esa decisión desde la realidad de las PyMEs\, para ayudar a valorar qué herramienta se ajusta mejor a sus proyectos. \nPara quién\nDirectivos y equipos técnicos de PyMEs de arquitectura\, ingeniería y construcción que evalúan su paso al BIM. \nInscribirse
URL:https://www.buildinar.com/session/autocad-o-revit-como-decide-una-pyme/
LOCATION:Online
CATEGORIES:BIM,Design
ATTACH;FMTTYPE=image/png:https://www.buildinar.com/wp-content/uploads/2026/11/cover-autocad-o-revit-como-decide-una-pyme-bn.png
END:VEVENT
END:VCALENDAR